How to change a pedal on a bike? (5 easy steps)

how to change pedal on bike

Pedalling is one of the essential parts of biking. But what if you need to change a pedal? If you are a biker, you know that you can’t just remove the whole pedal assembly and put a new one on. Replace the entire thing if you can. If you are a cyclist, you must be careful to ensure you do not lose your balance. And you don’t want to be the one who gets hurt. So, In this post, we will talk about how to change a pedal on a bike?

If you are new to cycling, you must understand that you cannot simply replace a single pedal and call it a day. You must ensure that you get all the parts together and assemble them correctly. You might be worried about the bike’s weight if you are a beginner. But, don’t worry. If you have got a good bike, you should be able to handle it.

You can ensure that you are handling it safely by keeping your weight on the centre of the pedal and shifting it to the rear when you want to go faster. As a beginner, you will probably not be comfortable with replacing the pedals and other parts.

How to change a pedal on a bike? (Easy steps)

It may seem like a simple task to replace the pedal. But it is a critical step. A brake pedal replacement is not as simple as it may seem.

If you’re like me, you have probably tried to change a pedal on a bike but ended up breaking it. So, I am going to share some steps with you on how to change a pedal on a bike so that you can avoid this problem and still be able to ride your bike.

  1. Appropriate tools

To change a pedal on a bike, you will need first to gather the appropriate tools. These include a,

  • wrench
  • Allen keys
  • pliers

and something else that you might need. You will be very frustrated if you don’t have the right tools to change a pedal. It is best to change a pedal while sitting on your bike. That way, you won’t lose control, and you won’t fall off the bike. When changing a pedal on a bike, you should be seated on the bike, and then you will be able to see your wheel. Then, you will know which side the pedal is located on.

2. Take of old pedal

take of old pedal

First, you will need to remove the old pedal. You can do this by using your Allen keys. And then, you will need to push in the pin. You can pull back on the pedal and go on the hook with your thumb. You will be able to hear the click when you have done it right. You should ensure that you remove all the screws before removing the pedal. Once you have removed the old pedal, you can replace it with a new one.

3. Install the new pedal

Install new pedal

after removing the old pedal, it’s time to fix the new pedal on your bike.

The first step in fixing a pedal is to loosen the screw using the Allen wrench. After reducing the screw, you can tighten it using the screwdriver. Once you do that, you will need to put the new pedal on the holder. Be careful while doing that. It would be best to not pull too hard on the pedal. Otherwise, you might break the pedal.

 4. Tighten the nuts

Next, tighten the screw using the Allen wrench. You can stop here if you are sure that the new pedal is secure. If you are unsure about the pedal’s position, you should recheck it. Once you are satisfied, put the pedal back in place. Now, you will need to check whether the screw is tightened or not. If it is not, use the Allen wrench to tighten the screw again. This will secure the new pedal in place. You can stop here if you are sure that the screw is tight.

5. Re-tighten


Re-tightening the screw is accessible. You need a screwdriver to loosen and tighten the screw. To reduce the screw, turn it counterclockwise. When you are sure that it has diminished, push the pedal down until it is halfway down. Then, pull the pedal back to its original position. If the pedal is still loose after you have done this, loosen it again. Continue doing this until the screw has wholly loosened. Tighten the screw by turning it clockwise.

(FAQS) How to change a pedal on a bike?

1. How do I change a pedal on a bike?

The first thing to do is to put the bike in gear. Then, loosen the crank arm. Then, remove the crank arm and replace it with the new one. Then, tighten the crank arm.

2. How do I know which pedal is the correct one?

You can tell which pedal is correct by looking at the number on the side of the pedal. The front left pedal has a three on the side. The front right pedal has a five on the side. The rear left pedal has a seven on the side. The right backpedal has a 9 on the side.

3. What if the pedal won’t move?

You can try tightening the pedal with a wrench. If you can’t draw the pedal, you may need to remove the crank arm and try again.

4. What do you need to change a bike pedal on a bike?

It would help if you loosen the nut that holds the pedal in place; then, removing the old pedal and replacing it with the new one would be easier.

5. Is it easy to change bike pedals?

If you’re a regular cyclist, you’ve probably had to change a pair of bike pedals at some point. There’s a reason why this is one of the most common repairs that cyclists need to perform. It’s easy, and it takes about 10 minutes to do. And you’ll save yourself the hassle of getting a new pair of pedals when you change them. But, if you’re not familiar with how to change a pedal on a bicycle, it can be a little bit tricky. In this post, we walked you through the process step-by-step so that you can get back on the road as soon as possible.

6. How do you change bike pedals at home?

In this post, I will explain how to change a pedal on a bike. Plz, go through this post. I hope you will find the best and easiest way to change the bike pedals.

The most straightforward step to removing a pedal from a bicycle is to unscrew the bolts from the bottom of the pedal. This is the method used by most professional mechanics. However, if you don’t have a tool or the right equipment to do it, it can be pretty tricky to do. It requires a screwdriver, a nut driver, a special torque wrench, and a lot of patience. Here is how to do it.

7. How do you unscrew bike pedals?

“You can unscrew the pedal by turning it clockwise and pulling down. The force of the screwdriver will break the adhesive holding the pedal to the crankarm. It is important to turn the pedal counterclockwise and push the pedal back up to remove it.”

8. Do I need a unique tool to change bike pedals?

Answered, “Yes”,

Changing a bike pedal is pretty straightforward. Like most people, you need a wrench and a screwdriver. But if you’re like some people, you may have difficulty finding the right tools or instructions.


In conclusion, if you are looking for an easier way to change your bike pedals, you should know that several options are available. This article discussed different steps of installing the new pedals, how they work, and how to change them. So we hope this guide will resolve your issue in a straightforward method.

Also check out our other articles

**Note: is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to

This article includes affiliate links. If you choose to purchase any of the products we’ve discussed in this article, we may receive a small commission.**